- Stok: Stokta Yok
- 5600K LED ışık
- COB Tek nokta LED Teknolojisi
- Parlaklık: 10000 Lümen
- 120 Derece ışık açısı
- Sert darbelere dayanıklı gövde
- Ayarlanabilir titreşimsiz ışık
- AC Adaptör ya da harici akü ile çalışma
- Sessiz çalışma
- Made in USA
Light & Motion 10000C overview
- 1
- 2
- 3
- 4
- 5
The Stella Pro 10000C spLED Corded Light from Light & Motion is a daylight-balanced LED source that packs enough features to cause many users to call it their ideal on-camera source. The spLED designation indicates "single point" enhancements to the 29 emitters that Light & Motion has made to reduce the light field and eliminate multiple shadows that can plague LED fixtures.
For location work, the Stella Pro 10000C is hard to beat. With a very small form factor and weight of 26.4 oz, it's barely noticeable in your kit case. What is noticeable is the clean, accurate color rendering output from the unit's fully dimmable, flicker-free COB LEDs that give it a rating of 90 CRI and 93 TLCI.
The Stella Pro 10000C has a wide 120-degree beam that can be narrowed with the included 50-degree optic or softened with an optional diffuser. The variable-speed fan turns on automatically when output exceeds 5000 lumens and runs at low decibels for sound-sensitive locations. And the housing is durably built. Not only can it survive repeated dropping on concrete from a height of 3.3', but it's also water-resistant
The unit has no built-in battery and is powered by the included AC power supply, but it will also run on 24V external batteries. The Stella Pro 10000C also comes with a 50-degree optic, Speedring Gel Holder, YS Mount Pro, C-Stand Mount, and a High Leverage Handle for secure mounting.
- YS Mount for Stella Pro Series LED Lights
The YS Mount for Stella Pro Series LED Lights from Light & Motion is a replacement part for the one that comes with "Pro" designated Stella lights.
UPC: 812190018129 - 3" Speed Ring and Gel Holder
Dedicated to the Light & Motion Stella 2000 and Stella Pro 5000 lights, this 3" Speed Ring and Gel Holder securely attaches to the front bezel of the light to permit connecting an optional 3" speed ring for working with softboxes or other light modifiers. It is constructed from lightweight ABS plastic, and its design also allows you to mount a hard 3 x 3" filter or a threaded 82mm screw-in filter.
UPC: 812190017849 - C-Stand Mount for Stella LED Lights
This C-Stand Mount for Stella LED Lights from Light and Motion allows you to mount your Stella 1000, 2000, or Pro 5000 fixture to a C-Stand or other 5/8" stud. The sturdy mount has a thumbscrew for rapid attachment.
UPC: 812190017924 - High Leverage Handle for Stella YS Mount
The ergonomic High Leverage Handle for Stella YS Mount from Light & Motion replaces the standard thumbscrew on the YS mount, making tilt adjustments fast and easy.
UPC: 812190018082
- 1
- 2
- 3
- 4
- 5
The Stella Pro 10000C spLED Corded Light from Light & Motion is a daylight-balanced LED source that packs enough features to cause many users to call it their ideal on-camera source. The spLED designation indicates "single point" enhancements to the 29 emitters that Light & Motion has made to reduce the light field and eliminate multiple shadows that can plague LED fixtures.
For location work, the Stella Pro 10000C is hard to beat. With a very small form factor and weight of 26.4 oz, it's barely noticeable in your kit case. What is noticeable is the clean, accurate color rendering output from the unit's fully dimmable, flicker-free COB LEDs that give it a rating of 90 CRI and 93 TLCI.
The Stella Pro 10000C has a wide 120-degree beam that can be narrowed with the included 50-degree optic or softened with an optional diffuser. The variable-speed fan turns on automatically when output exceeds 5000 lumens and runs at low decibels for sound-sensitive locations. And the housing is durably built. Not only can it survive repeated dropping on concrete from a height of 3.3', but it's also water-resistant
The unit has no built-in battery and is powered by the included AC power supply, but it will also run on 24V external batteries. The Stella Pro 10000C also comes with a 50-degree optic, Speedring Gel Holder, YS Mount Pro, C-Stand Mount, and a High Leverage Handle for secure mounting.
The YS Mount for Stella Pro Series LED Lights from Light & Motion is a replacement part for the one that comes with "Pro" designated Stella lights.
Dedicated to the Light & Motion Stella 2000 and Stella Pro 5000 lights, this 3" Speed Ring and Gel Holder securely attaches to the front bezel of the light to permit connecting an optional 3" speed ring for working with softboxes or other light modifiers. It is constructed from lightweight ABS plastic, and its design also allows you to mount a hard 3 x 3" filter or a threaded 82mm screw-in filter.
This C-Stand Mount for Stella LED Lights from Light and Motion allows you to mount your Stella 1000, 2000, or Pro 5000 fixture to a C-Stand or other 5/8" stud. The sturdy mount has a thumbscrew for rapid attachment.
The ergonomic High Leverage Handle for Stella YS Mount from Light & Motion replaces the standard thumbscrew on the YS mount, making tilt adjustments fast and easy.
Garanti
BU ÜRÜN 2 YIL GARANTİ İLE SATILMAKTADIR.