Pre-Trigger Remote Cable
For connecting a PlusX, Plus III, FlexTT5 or MultiMAX with ACC port to a Nikon MC-DC2 remote terminal
Cable lengths: 3' (91.5 cm) and 1' (30 cm)
From: 1/8" (3.5 mm) stereo miniphone
To: Nikon MC-DC2 remote shutter release terminal
Int'l #: N-MCDC2-ACC, N-MCDC2-ACC-1
US #: 802-455, 802-503
PocketWizard Compatibility:
PlusX
Plus III
FlexTT5
MultiMAX with ACC port to a Nikon 10-pin remote shutter release terminal
Use the N-MCDC2-P or N-MCDC2 for the Plus II, older MultiMAX, or other PocketWizard radios.
Description: This is a special remote shutter release cable called a Pre-Trigger Cable. A Pre-Trigger cable controls both the half-press and full-press function of your remote cameras shutter release. When a camera is pre-triggered, it is like holding your cameras shutter release button in the half-pressed or metering/focusing position.
This ACC cable allows a compatible PocketWizard radio to independently control both half-press and full-press functions
Added bonus: All N-MCDC2-ACC cables shipped into the market starting July/August 2013 include aMSMM Adapter (stereo to mono miniphone) which converts a MCDC2-ACC cable to a standard N-MCDC2miniphone cable. This change coincides with the introduction of our new retail packaging. All cables are now packaged in a environmental friendly cardboard box with rececyled white labels showing both ends of the cable as well as compatibility list. This replaces our old packaging of a zipped bag packaging.
A Standard Cable (N-MCDC2) works with most PocketWizard radios but has no half-press control, and is for basic remote triggering only. (Using a N-MCDC2-ACC cable with a MSMM Adapter will provide the same function as a N-MCDC2 cable.)
A Pre-Release or
Pre-Trigger (P) Cable N-MCDC2-P)works with most PocketWizard radios. This pre-trigger cable has a switch that allows you to toggle half-press on or off at the camera position, but not remotely.
(Using a N-MCDC2-ACC cable with a PTMM Adapter will provide the same function as a N-MCDC2-P cable.)
Compatible with the following radios:
PlusX: Use this cable with the PlusX to trigger the camera.
Plus III: Use this cable with the Plus IIIs exclusive 2-stage trigger to wake-up or focus your remote camera just like using the cameras shutter release button.
FlexTT5: This cable is required for auto-relay mode with E-TTL, or other remote triggering with the FlexTT5. Learn more here. You can use a N-MCDC2P (-P) Pre-Trigger cable or N-MCDC2 Standard Cable with a FlexTT5, but your remote camera will not be able to relay an E-TTL signal to Speedlites. The FlexTT5 does not support the 2-stage trigger function.
MultiMAX with ACC port: Enable a remote zone with your hand-held MultiMAX, and your remote MultiMAX will wake up its remote camera with this cable. As long as the zone is turned on, the remote camera will stay awake and respond more quickly and consistently, but also consume the camera's batteries much more quickly. When the remote zone is disabled, the camera will enter its normal sleep modes. The MultiMAX does not support the 2-stage trigger function.
Please see our PocketWizard Wiki for more details.
Compatible with cameras using Nikon's MC-DC2 remote terminal including:
Nikon
D90, D600, D3100, D3200, D5000, D5100, D5200, D7000
Not for Nikon D70s or D80-use NM4-ACC instead.
Garanti
BU ÜRÜN POCKETWIZARD TÜRKİYE YETKİLİ İTHALATÇISI OLAN ZOOM İTHALAT TARAFINDAN İTHAL EDİLMİŞ OLUP 2 YIL GARANTİ İLE SATILMAKTADIR.
